Belkin VoIP Bedienungsanleitung

INTRODUCTIONEnable wireless and wireless security on your Belkin VoIP modem/router.APPLIES TO:• F1PI241EGau

WPA:-1) Under Wireless click WPA2) Click Enable for WPA Function3) Authentication is Pre-Shared Key – leave all other settings as default4) In the spa

Connecting to the Wireless Network using Wireless Zero Configuration1) If you are using a laptop or notebook with a built in wireless connection, make

6) Select your network from the list and click Connect7) If you have encryption enabled – it will prompt you to enter your Network Key. In the Network

For further assistance setting up non-Belkin wireless cards (including laptops with built-in wireless) you will need to contact the appropriate manufa

TABLE OF CONTENTS:-Enable Wireless on your Modem/Router 1 Setup Wireless Encrypt

Before you begin:You will need:• Belkin Wireless / VoIP unit• Power cable• Network cableHardware check:• Your computer is switched on• The Wireless /

5) You will now be presented with more options in the menu on the left. Click Wireless then click Enable Wireless Function and click Save SettingsWir

WIRELESS SECURITY INFORMATIONClick the type of security you wish to setup:-1) 64 Bit WEP 2) 128 Bit WEP 3) WPA 3Encryption Type Pros Cons Recommend

64 Bit WEP:-1) Under Wireless click WEP2) Click Enable for WEP Function3) Click 64 Bit for WEP Mode leave all other settings as default4) Under Key 4

8) Now click WEP again9) Write down the characters in Key 1 – this is now your ‘Network Key’ or ‘Encryption Key’NB. There are ten (10) characters in t

128 Bit WEP:-1) Under Wireless click WEP2) Click Enable for WEP Function3) Click 128 Bit for WEP Mode leave all other settings as default4) Under Key

8) Now click WEP again9) Write down the characters in Key 1 – this is now your ‘Network Key’ or ‘Encryption Key’NB. There are twenty six (26) characte