Belkin Bob Bedienungsanleitung PDF herunterladen (Seite 7)

1110

Knowing your Router

section

3. Power Switch

Standard power switch used to turn the VOIP Router on and off.

4. Power Plug

Connect the included 12V 1A DC power supply to this inlet.

Using the wrong type of power adapter may cause damage to

your Modem.

5. Reset Button

The “Reset” button is used in rare cases when the Modem

may function improperly. Resetting the Modem will restore the

Modem’s normal operation while maintaining the programmed

settings. You can also restore the factory default settings by using

the Reset button. Use the restore option in instances where you

may have forgotten your custom password.

a. Resetting the Modem

Push and hold the Reset button for one second then release it.

When the PWR light becomes solid again the reset is com-

plete.

b. Restoring the Factory Defaults

Push and hold the Reset button for twenty seconds then

release it. When the PWR light becomes solid again the restore

is complete.

6. Phone Port

Phone Ports connect to standard analogue telephone set or fax

machine.

7. PSTN Failover Port

The Optional RJ-11 port is for connection to your PSTN (Home

Phone) line to provide normal phone call backup for when VOIP is

unavailable or not required.

8. ADSL SYNC LED

The ADSL LED flashes light during negotiation with your ISP. It

stays light when the Modem is connected properly to your ADSL

service.

Off - No ADSL connection

On - Blinking negotiating connection/no ADSL Sync

On - ADSL link is up and connected

9. Power LED

When you apply power to the Modem or restart it, a short period

of time elapses while the Modem boots up. When the Modem has

completely booted up, the power LED becomes a SOLID light,

indicating the Modem is ready for use.

Off Modem is off

On Modem is on

Back Panel

Broadband Voice Modem/Router - 1 Port Part # F1PI210ENau

Broadband Voice Modem/Router - 4 Port Part # F1PI241ENau

Broadband Voice Modem with Wireless Router - 4 port Part # F1PI241EGau

1. ADSL Line

This port is for connection to your ADSL line. Connect your ADSL

line to this port.

2. LAN Ports

The Ethernet port is RJ45, 10/100 auto-negotiation. Connect your

network-enabled computers or any networking devices to this

port.

1 2 3 4 5 6 7 8 9 10 11 12 ... 51 52

Kommentare zu diesen Handbüchern

Keine Kommentare

Belkin Bob Bedienungsanleitung Seite 7

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kopfhörer Belkin Bob