Belkin TuneStudio Bedienungsanleitung Seite 26

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 38
  • Inhaltsverzeichnis
  • FEHLERBEHEBUNG
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 25
TROUBLESHOOTING
Most problems with your TuneStudio can be solved quickly by following the advice in this chapter.
If you continue to have trouble, contact Belkin Customer Service at 800-223-5546 ext. 2263 or on the
web at
http://www.belkin.com/support.
If
the
Recording
Menu
button
doesn't
work:
Make sure you're using
an
iPod 5th generation (video). This button does not work with the iPod classic.
If you are using the iPod classic, simply navigate to the "Voice Memo" menu on the iPod itself.
If
your
TuneStudio
won't
turn
on:
Make sure you're using the supplied
12V
1.25A power adapter.
Try using another power outlet.
If
you
don't
hear
anything
in
the
studio
monitors
or
headphones:
Make sure your TuneStudio is plugged
in
and turned on.
Make sure the cables are securely connected.
Verify your source is playing.
Turn up the level control(s).
If these suggestions
don't
help, you might have a bad cable. Check all of your cables and try replacing them
with known good ones.
If
the
microphone
volume
is
too
low:
Make sure the cables are securely connected.
If you are using a condenser mic,
try
turning
on
phantom power.
If the microphone is connected to channel 1 or
2,
turn up the gain control.
If
an
instrument's
volume
is
too
low:
Make sure the cables are securely connected.
Turn up the instrument's volume. If the volume
is
still too low, check the instrument by connecting your
headphones to the instrument.
Adjust the channel's level control.
Seitenansicht 25
1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 37 38

Kommentare zu diesen Handbüchern

Keine Kommentare