Belkin Omniview SMB KVM-over-IP Switch F1DP108G Bedienungsanleitung PDF herunterladen (Seite 74)

section

Troubleshooting

Local Console

General

Problem:

My server does not boot when connected to the Switch but works fine

when I connect the keyboard, video, and mouse directly to the server.

Solution:

•Makesurethatthekeyboardandmousecablesareconnectedtightlybetween

the Server Interface Module and the server.

•Checkthatthekeyboardandmousecablesarenotcrossed.

•ChecktheCAT5cableconnection.

Video

Problem:

I am getting ghosting, shadowing, or fuzzy images on my local monitor.

Solution:

• Check that all video cables are inserted properly to the Server

Interface Module.

• Check that the monitor you are using supports the resolution and

refresh-rate setting on your server.

• Lower the video resolution of your monitor.

• Check that the cable length does not exceed 100 feet (30m).

• Check that the graphics card you are using supports the resolution and

refresh-rate setting on your server.

• Connect the monitor directly into the server with which you are having trouble

to see if the problem still appears.

Problem:

I am getting a black screen on my local monitor.

Solution:

• Check that all video cables are inserted properly.

• Check that the keyboard cable is connected and inserted properly between

the server and the Server Interface Module for the appropriate port.

• Connect your monitor directly to the server to verify that your monitor is

functioning properly.

Troubleshooting

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 83 84

Keine Kommentare

Belkin Omniview SMB KVM-over-IP Switch F1DP108G Bedienungsanleitung Seite 74