Belkin OMNIVIEW F1DA104PEA Bedienungsanleitung PDF herunterladen (Seite 14)

Installation

section

Connecting Multiple PRO2 PS/2s (Daisy-Chaining)

You can daisy-chain up to 16 PRO2 PS/2s together, giving a server

administrator control over a maximum of 256 computers. When daisy-

chained together, each unit is referred to as a “BANK” and assigned

an address. The Console keyboard, mouse, and monitor connects to

BANK 00 and is referred to as the “Master” switch. BANKs 01 through

15 are referred to as “Slave” switches.

Note: A daisy-chain cable (F1D108-CBL) is required to daisy-chain

each PRO2 PS/2 and is available through your Belkin reseller or online

at belkin.com.

All PRO2 PS/2s feature a “BANK DIP” switch. The BANK DIP switch is

used for proper identification and use of PRO2 PS/2s in a single-unit

or daisy-chain configuration.

• For a single-unit configuration, set the BANK DIP switch on the

PRO2 PS/2 to the “Master” (BANK address 00) setting. This is the

factory default setting.

• For multi-unit configuration, the BANK DIP switch on the Master

unit must be set to “BANK address 00”. Slave units must be set to a

unique BANK address (from 01 through 15). Refer to the chart below

for BANK DIP switch settings.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 35 36

Keine Kommentare

Belkin OMNIVIEW F1DA104PEA Bedienungsanleitung Seite 14