Belkin OmniView F1DP116G Bedienungsanleitung PDF herunterladen (Seite 36)

Remote Installation

Enable DHCP

When this box is checked (default setting), a DHCP server on your network is

enabled to assign an IP address to the Switch. When this box is not checked

(recommended), you can assign a static IP address to the Switch.

Set a Static IP

If you choose not to use DHCP, uncheck the “Enable DHCP” box, then enter

the IP address, subnet mask, and default gateway for LAN, as provided by your

network administrator.

Note: If you enter a static IP address without unchecking the “Enable DHCP”

box, the static IP address will not work and DHCP will remain enabled.

Note: Where you have access to the server, your configured (or default) Switch

device name will appear on the DHCP server’s list, making it easy to locate.

1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 83 84

Keine Kommentare

Belkin OmniView F1DP116G Bedienungsanleitung Seite 36