The OmniView SE 4-PortUser ManualP72464 F1D104The OmniView SE 4-PortUser Manual™
9The OmniView™SE is designed to be able to cascade with the OmniView™PRO aswell. In such a scenario, it is recommended that the OmniView™PRO be the M
10Daisy-Chained Operation (continued)Adding Slave UnitsThis assumes you already have a MASTER unit (or MASTER and slave units) set-up andworking prope
Cable 1Cable 2Cable 3MASTER(Bank 0)slave(Bank 2)slave(Bank 3)Daisy-Chaining the OmniView™SE:slave(Bank 1)11Daisy-Chained Operation (continued)
12UsageKeyboard "Hot” Key commands:You can also conveniently command the OmniView™SE to switch ports through simplekeyboard key sequences. To se
13Usage (continued)You can switch directly to any port by giving the OmniView™SE the BANK and PORTnumbers. For instance, if you press [SCROLL LOCK]
14Troubleshooting General Problems:Q: When cascading, the MASTER unit does not see the slave unit(s).A: • Refer to the Hardware Installation section
15Troubleshooting (continued)Q: The computers boot up fine, but the mouse does not work.A: • Check the cables and make sure they are inserted properl
16Troubleshooting (continued)work just as long as it is set for PS/2 mode with the correct adapter. A serial-only mouse with a combo mouse adapter W
17InformationContacting Belkin Componentswww.belkin.comFCC StatementThis equipment has been tested and found to comply with the limits for a Class B d
Thank you for purchasing the Belkin Components OmniView™SE KVM switch.Controlling multiple PCs from one keyboard, mouse and monitor has never beeneasi
Technical SpecificationsConsole Connectors:Keyboard: 6 pin Mini DIN femaleMouse: 6 pin Mini DIN female (for PS/2 mouse)DB9 male (for spare serial mous
Product DetailSLAVE INPUTDB25 Daisy-chain portMASTER INPUTSLAVE OUTPUTDB25 Daisy-chain portDC power jackDIP switchesOptional serialmouse connectorCONS
Make sure you have the right cables!The OmniView™SE requires cables to connect the eight computers you will becontrolling. Below are the Belkin part
1. Set the DIP switches. If you have only one OmniView™SE, use the MASTER banksetting. If the OmniView™SE you are using will be daisy-chained off ano
4. Connect the keyboard and mouse to the OmniView™SE. If you have an AT-style keyboard, you will need an AT-PS/2 adapter (Belkin Part# F2N017).5. Conn
Hardware Installation (continued)6. Connect the first computer's mouse cable to the OmniView™SE. If using a PS/2cable (Belkin Part# F2N036-XX),
Hardware Installation (continued)11. You can now power up all of your computers simultaneously. The first computer will show up on the monitor. Check
Kommentare zu diesen Handbüchern