Belkin F1DP116G Bedienungsanleitung PDF herunterladen (Seite 2)

Step 7

Click “Restore”. The factory defaults will be restored. When the process finishes, you will be prompted to

reboot.

Step 8

Click “Reboot” to restart the IP Device.



52xxKSeries

In order to restore your KVM switch to factory defaults without using the web interface, follow the steps below:

Step 1

Take a USB flash drive (any type will do) and create a new text file in its root.

Step 2

Rename the file to the default as shown below.

This file shouldn’t have any content or extension; it should just be an empty file with the size of zero.

Step 3

Connect the KVM switch to the monitor and connect the USB flash drive to one of the USB ports on the KVM switch.

Step 4

Restart KVM switch. The switch will boot, find the file, restore the factory settings, delete the file, and restart again. All

these operations will be performed automatically.

Step 5

Wait for the On-Screen Display (OSD) menu to appear. When it does, the switch has been restored to its factory settings.

manufacturers listed.

*OmniView is a registered trademark of Belkin International, Inc.

1 2

Keine Kommentare

Belkin F1DP116G Bedienungsanleitung Seite 2