Belkin High Speed ADSL2+ Modem Bedienungsanleitung PDF herunterladen (Seite 10)

1716

Manually Configuring your Modem-Router

section

UPnP Configures the Modem-Router’s Universal Plug

and Play features.

DDNS Configures the Dynamic DNS function.

Tools Contains options to back up and restore the

current configuration, restore all configuration

settings to the factory defaults, update system

firmware, or reset the system.

Status Provides WAN connection type and status,

firmware and hardware version numbers, system

IP settings, as well as DHCP, NAT, and firewall

information.

System Settings

Time Settings

Set the time zone and time server for the Modem-Router. This

information is used for log entries and client access control.

Check “Enable Automatic Time Server Maintenance” to automatically

maintain the Modem-Router’s system time by synchronizing with

a public time server

over the Internet.

Then configure two

different time servers by

selecting the options in

the Primary Server and

Secondary Server fields.

Password Settings

Use this page to restrict

access based on a

password. By default, the

password is “admin”.

Passwords can contain

from 3 to12 alphanumeric

characters which are case

sensitive.

Note: If your password

is lost, or you cannot

gain access to the user

interface, press the reset

button on the rear panel

(holding it down for at

least 10 seconds) to restore the factory defaults. (By default the

password is “admin” password.)

Enter a maximum Idle Time Out (in minutes) to define a maximum

period of time an inactive login session will be maintained. If the

connection is inactive for longer than the maximum idle time, it will be

logged out, and you will have to login to the web management system

again. (Default: 10 minutes)

Remote Management

By default, management

access is only available

to users on your local

network. However, you can

also manage the Modem-

Router from a remote host

by checking the Enabled

check box, and if you

wish you can set a HOST

ADDRESS, which will only

allow that computer to use

remote management. The

port field should be left as

the default setting of 8080

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 27 28

Kommentare zu diesen Handbüchern

Keine Kommentare

Belkin High Speed ADSL2+ Modem Bedienungsanleitung Seite 10

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Belkin High Speed ADSL2+ Modem