Belkin Wireless G Desktop Bedienungsanleitung PDF herunterladen (Seite 29)

2726

Troubleshooting

2726

If the correct network name is listed in the “Available Networks”

list, please follow the steps below to connect wirelessly:

1. Click on the correct network name in the “Available Networks” list.

2. If the network has security (encryption) enabled, you will need to

enter the network key. For more information regarding security,

please see “Securing your Wi-Fi Network” on page 15 of this

manual.

3. Within a few seconds, the tray icon in the lower right-hand

corner of your screen should turn green, indicating a successful

connection to the network.

If you are still unable to access the Internet after connecting to the

wireless network, please contact Belkin Technical Support.

The name of your wireless network DOES NOT appear in the list of

“Available Networks”.

If the correct network name is not listed under “Available Networks” in

the WNU, please attempt the following troubleshooting steps:

1. Temporarily move computer, if possible, to five to 10 feet away from

the Wireless Router. Close the WNU and reopen it. If the correct

network name now appears under “Available Networks”, you may

have a range or interference problem. Please see the suggestions

listed in the “Placement of your Wireless Networking Hardware for

Optimal Performance” section on page 2.

2. 2. Using a computer that is connected to the Wireless Router

via a network cable (as opposed to wirelessly), ensure that

“Broadcast SSID” is enabled. This setting is found on the

Router’s wireless “Channel and SSID” configuration page. For

detailed instructions on accessing this page and changing

settings, please see your Wireless Router’s User Manual.

If you are still unable to access the Internet after completing these

steps, please contact Belkin Technical Support.

1 2 ... 24 25 26 27 28 29 30 31 32 33 34 ... 38 39

Keine Kommentare

Belkin Wireless G Desktop Bedienungsanleitung Seite 29