Belkin Wireless G Router Bedienungsanleitung PDF herunterladen (Seite 70)

6968

Using the Web-Based Advanced User Interface

6968

Using the Web-Based Advanced User Interface

5. From a computer already connected to your Router, access the

Advanced Setup Utility by opening your browser. In the address

bar, type in “192.168.2.1”. Do not type in “www” or “http://”

before the number. Note: If you have changed your Router’s IP

address, use that IP address.

6. You will see the Router’s user interface in the browser window.

Click “Wireless Bridge” (2) on the left-hand side of the screen.

You will see the following screen.

7. Check the box that says “Enable ONLY specific Access Points to

connect” (1).

8. In the field named AP1 (3), type in the MAC address of your

secondary Access Point. When you have typed in the address,

click “Apply Changes”.

9. Bridging is now set up.

(1)

(2)

(3)

1 2 ... 65 66 67 68 69 70 71 72 73 74 75 ... 132 133

Keine Kommentare

Belkin Wireless G Router Bedienungsanleitung Seite 70