Belkin OmniView F1DP116S Bedienungsanleitung PDF herunterladen (Seite 17)

P75598- Belkin OmniView Serial Console

will time-out and terminate the session.

Assigning IP from the Local Console Port - VT-100 (Console, Telnet, SSH)

The Serial Console also offers a user-friendly menu-driven Command Line interface. You

can simply connect a VT-100 terminal to the local console port to access to the Serial

Console. This is useful when you do not know the network settings of the Serial Console,

and can not access it. Through the local Console port you can view or change the settings

(IP address, subnet mask, etc).

Step 1

1. Connect the console port on the rear panel to a serial port on a PC host using the

CAT5 cable and the appropriate RJ45/DB9F adapter included with the Belkin Serial

Console.

2. Configure a terminal emulation program, such as HyperTerminal, using the following

parameters:

 Baudrate = 115200

 data bits = 8

 stop bits = 1

 parity = none

 flow control = none

Note: User names and passwords are the same as set through the Web Interface. The

defaults are admin/admin.

17 / 66

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 65 66

Keine Kommentare

Belkin OmniView F1DP116S Bedienungsanleitung Seite 17