Belkin OmniView Bedienungsanleitung PDF herunterladen (Seite 10)

The OniniView" SE requires nothing more than the PS/2 Cable Kit to cascade to another OmrdView' SE.

Usage:

Selecting which computer to operate can be done in two different ways - either by pressing the front-panel pushbutton, or

by entering the hot-key sequence.

Pressing the pushbutton in front simply cycles through every port on the OmniView', as shown by the solid green light

on any of the 'PC Ports' 1 through 4. -

To select a computer on cascaded OmniViews" press the button to select the port where the cascaded OmniView' is

connected. Then, select the port on the cascaded OmniView" where the desired computer is connected..

Entering the hot-key sequence allows direct port access from the keyboard, even through cascaded OmniViews'. The procedure is very

simple, and easy to remember:

1. Press <ALT>+<CTRL>+<SHIFr> all at the same time, then release.

2. Press the port number of the computer you wish to control. If you have cascaded OmniViews, you will have to press two (or three)

numbers, x y z, where x is the port m the top level OmniView", y is the port on the second level (or keys in succession), then release.

3. Press <ENTER>, then release.

1 2 ... 5 6 7 8 9 10 11 12

Keine Kommentare

Belkin OmniView Bedienungsanleitung Seite 10