Belkin OmniView Bedienungsanleitung PDF herunterladen (Seite 21)

1918

section

1918

Installation

Step 4

Connect the Belkin Dual-Port Micro-Cable Kit for USB to the desired host

ports on the PRO3 KVM Switch. (Refer to diagram below.) Your server should

recognize the KVM-Switch connection and automatically install the HID USB

driver, if necessary.

Step 5

Repeat Steps 1 through 4 for each additional USB server you wish to connect.

Note: We recommend that you attach the Belkin Dual-Port Micro-Cable USB Kit

directly to a free USB port on your server.

Note: When a USB Cable Kit is connected to a Sun server, the Server Interface

Module emulates the Sun keys using a set of key combinations called “combo

keys”. Refer to the table on page 35 for a list of Sun functions supported by the

PRO3 KVM Switch.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 47 48

Keine Kommentare

Belkin OmniView Bedienungsanleitung Seite 21