Belkin OmniView Quad-Bus Server Interface Module, USB Sun Bedienungsanleitung PDF herunterladen (Seite 8)

8 Installing your Server Interface Module

Step 5 Connect the Quad-Bus KVM-over-IP or CAT5 KVM Switch to the

Server Interface Module using the included Belkin CAT5e Patch Cable

or other CAT5 cable.

Step 6 Repeat steps 2 through 5 for each additional USB Sun server

you wish to connect.

Step 7 Power up all connected servers.

Step 8 Power up your Quad-Bus KVM-over-IP or CAT5 KVM Switch.

You are now ready to use your OmniView Quad-Bus Server Interface Module.

If you have any problems during installation, please refer to the OmniView

Quad-Bus KVM-over-IP or CAT5 KVM Switch User Manual.

Server

Note:

Your server should recognize your Server Interface Module and automatically

install the HID USB driver if necessary.

P74936_F1DW101AeaAS_QIG.indb 8 9/1/07 5:41:06 pm

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 51 52

Keine Kommentare

Belkin OmniView Quad-Bus Server Interface Module, USB Sun Bedienungsanleitung Seite 8