Belkin F5D8630 Bedienungsanleitung PDF herunterladen (Seite 48)

4746

Manually Configuring your Router

4746

Manually Configuring your Router

Setting WPA (with radius server) Settings

If your network uses a radius server to distribute keys to the clients,

use this setting.

1. From the “Security Mode” drop-down menu, select

“WPA—Radius server)”.

2. For Encryption Technique, select “TKIP” or “AES”. This setting

will have to be identical on the clients that you set up

3. Enter the IP address of the radius server into the “Radius

Server” fields.

4. Enter the radius key into the “Radius Key” field.

5. Enter the key interval. Key interval is how often the keys are

distributed (in packets).

6. Click “Apply Changes” to finish. You must now set all clients to

match these settings.

Configuring your Belkin Wireless G Network Cards to

Use Security

Please Note: This section provides information on how to configure

your Belkin Wireless G Network Cards to use security.

At this point, you should already have your Wireless Router or access

point set to use WPA or WEP. In order for you to gain a wireless

connection, you will need to set your wireless notebook card and

wireless desktop card to use the same security settings.

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 91 92

Keine Kommentare

Belkin F5D8630 Bedienungsanleitung Seite 48