Belkin 2-Port KVM Switch with Built-In Cabling F1DK102P Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Computerzubehör Belkin 2-Port KVM Switch with Built-In Cabling F1DK102P herunter. Belkin 2-Port KVM Switch with Built-In Cabling F1DK102P User Manual Benutzerhandbuch

  • Herunterladen
  • Zu meinen Handbüchern hinzufügen
  • Drucken
  • Seite
    / 2
  • Inhaltsverzeichnis
  • LESEZEICHEN
  • Bewertet. / 5. Basierend auf Kundenbewertungen
Seitenansicht 0
This sheet will guide you through the basic steps needed to
install the 2-Port KVM Switch with Built-In Cabling (the Switch). If you
have any problems during installation, please refer to the User Manual.
Introduction
Connecting the Keyboard, Video, and
Mouse to the Console Ports on the Switch
1
Connecting Computers to the Switch
2
1. Power down all computers.
2. Connect your PS/2-type keyboard and mouse to the KEYBOARD and
MOUSE ports located on the front panel of your Switch.
3. Take the video cable that is attached to your monitor and connect it to
the VGA port on the front panel of the Switch.
1. Using the attached cables, take the VGA cable and connect it to
the VGA port on the first computer.
2. Connect the PS/2 keyboard KVM cable to the keyboard port on
the computer.
3. Connect the PS/2 mouse KVM cable to the mouse port on
the computer.
Repeat Steps 1 through 3 for
the additional computer to be
connected to the Switch.
You will need the following items to install the Switch:
2-Port KVM Switch with Built-In Cabling
One (each) keyboard, monitor, and mouse
Seitenansicht 0
1 2

Inhaltsverzeichnis

Seite 1 - Introduction

This sheet will guide you through the basic steps needed to install the 2-Port KVM Switch with Built-In Cabling (the Switch). If youhave any problems

Seite 2 - Built-In Cabling

Power up your computers.You are now ready to use your Switch.Please refer to your User Manual for additional information.Power on your Computers3Belki

Kommentare zu diesen Handbüchern

Keine Kommentare