Belkin F5D7632uk4A Bedienungsanleitung PDF herunterladen (Seite 20)

Manually Configuring your Router

DHCP Server

The DHCP server function makes setting up a network very easy by assigning IP

addresses to each computer on the network automatically. The default setting is

“On”. The DHCP server can be turned OFF if necessary; however, in order to do so,

you must manually set a static IP address for each computer on your network. To

turn off the DHCP server, select “Off” and click “Apply Changes”.

IP Pool

The range of IP addresses set aside for dynamic assignment to the computers on

your network. If you want to change this number, you can do so by entering a new

starting and ending IP address and clicking on “Apply Changes”. The starting IP

address must be lower in number than the ending IP address.

Lease Time

The length of time the DHCP server will reserve the IP address for each computer.

We recommend that you leave the lease time set to “Forever”. The default setting

is “Forever”, meaning that any time a computer is assigned an IP address by the

DHCP server, the IP address will not change for that particular computer. Setting

lease times for shorter intervals such as one day or one hour frees IP addresses

after the specified period of time. This also means that a particular computer’s IP

address may change over time. If you have set any of the other advanced features

of the Router such as DMZ or client IP filters, these are dependent on the IP

address. For this reason, you will not want the IP address to change.

Local Domain Name

You can set a local domain name (network name) for your network. There is no

need to change this setting unless you have a specific advanced need to do so. You

can name the network anything you want such as “MY NETWORK”.

DHCP Client List

You can view a list of the computers, which are connected to your network. You are

able to view the IP address of the computer, the host name (name of the computer

in your network), and the MAC address of the computer’s network interface card

(NIC). Pressing the “Refresh” button will update the list. If there have been any

changes, the list will be updated.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 85 86

Keine Kommentare

Belkin F5D7632uk4A Bedienungsanleitung Seite 20