Belkin F1DN102P Bedienungsanleitung PDF herunterladen (Seite 19)

Belkin® Advanced Secure DisplayPort KVM

SECTIONSTable of Contents 1 2 3 4 5 6 7 84

BACK TO TABLE OF CONTENTS >

OPERATING THE KVM SWITCH

Selecting a Computer Using Port Selectors

Now that you have connected your console and computers to the

Switch, it is ready for use. You can select which computer you wish

to control by pressing the corresponding port selector on the front of

the Switch. The LED number will illuminate to indicate which computer

(or port) is currently selected. It may take approximately 1 second for

the video signal to sync after switching ports. This is normal behavior

and is dependent on the display connected. This is normal operation

and ensures that proper synchronization is established between the

monitor and the connected computers.

Keyboard and mouse inputs can only be sent to the selected

computer, and video outputs can only be received from the selected

computer. The Switch also prevents any data transfer between

connected computers, ensuring the security of your computers.

Please note that the default port at power-up is port 1. In case of a

power failure or if the power is cycled, the Switch will default to port 1.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 27 28

Keine Kommentare

Belkin F1DN102P Bedienungsanleitung Seite 19