Belkin ADSL Modem with Wireless 802.11g Router Bedienungsanleitung PDF herunterladen (Seite 24)

2524

Manually Configuring your Router

2524

1. User Name - Enter the user name. (Assigned by your ISP).

2. Password - Enter your password. (Assigned by your ISP).

3. Retype Password - Confirm the password.

(Assigned by your ISP).

4. IP Assigned by ISP – Leave “Yes” if your ISP automatically

assigns IP address. If your ISP assigned a fixed IP address,

select “No” and enter assigned values.

5. VPI/VCI - Enter your Virtual Path Identifier (VPI) and Virtual

Circuit Identifier (VCI) parameter here. (Assigned by your ISP).

6. Encapsulation - Select your encapsulation type (supplied by

your ISP) to specify how to handle multiple protocols at the

ATM transport layer. VC-MUX: PPPoA Virtual Circuit Multiplexer

(null encapsulation) allows only one protocol running per virtual

circuit with fewer overheads. LLC: PPPoA Logical Link Control

allows multiple protocols running over one virtual circuit (more

overhead).

7. Dial on Demand - By selecting “Dial on Demand” your Router

will automatically connect to the Internet when a user opens up a

web browser.

8. Idle Time (Minutes) - Enter the maximum idle time for the

Internet connection. After this time has been exceeded, the

connection will be terminated.

9. MTU - The MTU setting should never be changed unless your you

a specific MTU setting. Making changes to the MTU can cause

problems with your Internet connection including disconnection

from the Internet, slow Internet access and problems with

Internet applications working properly.

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 107 108

Keine Kommentare

Belkin ADSL Modem with Wireless 802.11g Router Bedienungsanleitung Seite 24