Belkin N1 VISION Bedienungsanleitung PDF herunterladen (Seite 44)

4342

Alternate Setup Method

section

Setting your ISP Connection Type to Static IP (IPoA)

This connection type is also called “Classical IP over ATM” or “CLIP”, which

your ISP provides to a fixed IP for your Router to connect to the Internet.

1. IP Address – Enter an IP address assigned by your ISP for the

Router’s WAN interface.

2. Subnet Mask – Enter a subnet mask assigned by your ISP.

3. Default gateway – Enter a default gateway IP address. If

the Router cannot find the destination address within its local

network, it will forward the packets to the default gateway

assigned by your ISP.

4. VPI/VCI – Enter your VPI and VCI parameter here. These

identifiers are assigned by your ISP.

5. Encapsulation – Select LLC or VC MUX that your ISP uses.

Click “Apply Changes” to save and activate your settings. To go back to

the original settings before saving, click “Clear Changes”; or click any of the

quick-navigation links for other options. Your new settings will not be saved

unless you click “Apply Changes”.

(1)

(2)

(3)

(4)

(5)

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 113 114

Keine Kommentare

Belkin N1 VISION Bedienungsanleitung Seite 44