Belkin N1 VISION Bedienungsanleitung PDF herunterladen (Seite 54)

5352

Using the Web-Based Advanced User Interface

section

Using the Bandwidth Switch

This switch allows you to set the Router’s wireless bandwidth modes.

There are several modes available:

1) 20MHz only

Setting the Router to this mode allows only 20MHz operation. This

mode is compatible with N1, draft 802.11n-, 802.11g-, and

802.11b-compliant devices, but will limit N1, draft 802.11n-compliant

devices’ bandwidth by half. Reducing bandwidth to 20MHz-only

operation might solve some wireless problems.

2) 20MHz/40MHz Auto

Setting the Router to this mode allows it to switch automatically

between 20MHz and 40MHz operation. This mode enables 40MHz

operation, to maximize speed for N1, draft 802.11n-compliant

devices when conditions permit. When a legacy 802.11g access

point is presented and occupies an adjacent secondary channel,

the Router automatically reverts to 20MHz operation to maximize

compatibility. We recommend using this as the default mode.

802.11e QoS

WMM

(Wi-Fi Multimedia™), based on 802.11e QoS (Quality of

Service), prioritizes important data on your network, such as

multimedia content and voice-over-IP (VoIP), so it will not be

interfered with by other data being sent over the network. This feature

requires other wireless devices, such as Wi-Fi phones or wireless

laptops, to support WMM for best results.

1 2 ... 49 50 51 52 53 54 55 56 57 58 59 ... 113 114

Keine Kommentare

Belkin N1 VISION Bedienungsanleitung Seite 54