Belkin F5D7632uk4A Bedienungsanleitung PDF herunterladen (Seite 56)

Manually Configuring Network Adapters

6. If not already selected, select “Obtain an

IP address automatically” (1) and “Obtain

DNS server address automatically” (3).

Click “OK”. Your network adapter(s) are

now configured for use with the Router.

Windows 98SE or Me

1. Right-click on “My Network Neighborhood”

and select “Properties” from the drop-

down menu.

2. Select “TCP/IP -> settings” for your installed

network adapter. You will see the following

window.

3. If “Specify an IP address” is selected, your

Router will need to be set up for a static

IP connection type. Write the address

information in the table below. You will

need to enter this information into the

Router.

4. Write down the IP address and subnet mask

from the “IP Address” tab (3).

5. Click the “Gateway” tab (2). Write down the

gateway address in the chart.

(2)

(1)

(3)

6. Click the “DNS Configuration” tab (1). Write down the DNS address(es) in the

chart.

7. If not already selected, select “Obtain an IP address automatically” on the “IP

Address” tab. Click “OK”. Restart the computer. When the computer restarts,

your network adapter(s) are now configured for use with the Router. Set up the

computer that is connected to the cable or DSL modem by FIRST using these

steps. You can also use these steps to add computers to your Router after the

Router has been set up to connect to the Internet.

Mac OS up to 9.x

In order for your computer to properly communicate with your Router, you will need

to change your Mac computer’s TCP/IP settings to DHCP.

1. Pull down the Apple menu. Select “Control Panels” and select “TCP/IP”.

2. You will see the TCP/IP control panel. Select “Ethernet Built-In” or “Ethernet” in

the “Connect via:” drop-down menu (1).

(2)

(1)

1 2 ... 51 52 53 54 55 56 57 58 59 60 61 ... 85 86

Keine Kommentare

Belkin F5D7632uk4A Bedienungsanleitung Seite 56