Belkin N1 VISION Bedienungsanleitung PDF herunterladen (Seite 60)

5958

Using the Web-Based Advanced User Interface

section

IMPORTANT: Make sure your wireless computers are updated to work

with WPA2 and have the correct settings to get proper connection to

the Router.

Setting WPA Security

Note: To use WPA security, your wireless network cards must be

equipped with software that supports WPA. At the time this User Manual

was published, a security patch from Microsoft is available for free

download. This patch works only with Windows XP.

Your Router supports WPA-PSK (no server). WPA-PSK uses what is

known as a pre-shared key as the security key. A pre-shared key is

basically a password that is between eight and 39 characters long. It

can be a combination of letters, numbers, or characters. Each client

uses the same key to access the network. Typically this is the mode

that will be used in a home environment.

Setting WPA-PSK

From the “Security Mode” drop-down menu, select “WPA-PSK (no

server)”.

2. For “Encryption Technique”, select “TKIP” or “AES”. This setting will

have to be identical on the clients that you set up.

3. Enter your pre-shared key. This can be from eight to 39 characters

and can be letters, numbers, or symbols. This same key must be

used on all of the clients that you set up.

4. Click “Apply Changes” to finish. You must now set all clients to

match these settings.

1 2 ... 55 56 57 58 59 60 61 62 63 64 65 ... 113 114

Keine Kommentare

Belkin N1 VISION Bedienungsanleitung Seite 60