Belkin F5U222V Datenblatt PDF herunterladen (Seite 4)

TMP3200/090 DATASHEET

Doc. No. 37061 Rev. J 4 of 6

TMC090 Controller

Specifications. The TMC090 controller specifications are subject

to change without prior notice.

DIMENSIONS refer to TMC090 Mounting Drawing

RATING NEMA 1 (I.P. 30)

WEIGHT 2.15 kg ( 4.75 lb.)

OPERATING TEMP. 0° to 50°C (32° to 122° F), non-condensing

REQUIRED POWER 95-130 VAC, 2 amps, 50-60 Hz single phase

200-250 VAC, 1 amp, 50-60 Hz single phase

I/O VOLTAGE 12 to 24 VDC (customer-supplied)

TMC090 Mounting Drawing

Environmental Considerations. The following environmental

considerations must be taken into account when installing the

TMC090 controller.

Contaminants. The vented and fan-cooled TMC090 is rated

NEMA 1 (IP30). Accordingly, in environments where solid

and/or liquid contaminants are present, the possibility exists that

these contaminants can be drawn into the TMC090 controller

and possibly result in failure of a number of electronic

components. For that reason, in these types of environments, the

controller must

be located in a sealed industrial enclosure.

EMI Susceptibility. Although the system has been found to be

in compliance with pertinent susceptibility standards, care

should be taken when installing near welders and other extreme

generators of electromagnetic interference (EMI). Particular care

should be taken to ensure welder currents are not injected

through the marking head chassis. The marking head chassis is

connected to the electrical service earth ground through the

marking head cable. The marking head should be electrically

isolated from all surfaces which could become part of a welder

current path.

1 2 3 4 5 6

Keine Kommentare

Belkin F5U222V Datenblatt Seite 4