Belkin N1 VISION Bedienungsanleitung PDF herunterladen (Seite 87)

8786

Manually Configuring Network Settings

section

Set up the computer that is connected to the ADSL modem FIRST

using these steps. You can also use these steps to add computers

to your Router after the Router has been set up to connect to the

Internet.

Manually Configuring Network Settings in Mac OS up to 9.x

Pull down the Apple menu. Select “Control Panels” and

select“TCP/IP”.

2. YouwillseetheTCP/IPcontrolpanel.Select“EthernetBuilt-In”

or “Ethernet” in the “Connect via:” drop-down menu (1).

3. Next to “Configure”

(2), if “Manually” is

selected, your Router

will need to be set

up for a static IP

connection type. Write

the address information

in the table below.

You will need to enter

this information into

the Router.

4. If not already set, at “Configure:”, choose “Using DHCP Server”.

This will tell the computer to obtain an IP address from the Router.

(1)

(2)

5. Close the window.

If you made any

changes, the following

window will appear.

Click “Save”.

Restart the computer. When the computer restarts, your network

settings are now configured for use with the Router.

1 2 ... 82 83 84 85 86 87 88 89 90 91 92 ... 113 114

Keine Kommentare

Belkin N1 VISION Bedienungsanleitung Seite 87