Belkin Vision Wireless Router N1 Bedienungsanleitung PDF herunterladen (Seite 48)

4544

Alternate Setup Method

4544

Configuring your WAN Media Access Controller (MAC) Address

All network components including cards, adapters, and routers, have

a unique “serial number” called a MAC address. Your Internet Service

Provider (ISP) may record the MAC address of your computer’s adapter

and only let that particular computer connect to the Internet service.

When you install the N1 Vision, its own MAC address will be “seen” by

the ISP and may cause the connection not to work. Belkin has provided

the ability to clone (copy) the MAC address of the computer into the N1

Vision. This MAC address, in turn, will be seen by the ISP’s system as

the original MAC address and will allow the connection to work. If you

are not sure whether your ISP needs to see the original MAC address,

simply clone the MAC address of the computer that was originally

connected to the modem. Cloning the address will not cause any

problems with your network.

Cloning your MAC Address

To clone your MAC address, make sure that you are using the computer

that was ORIGINALLY CONNECTED to your modem before the N1 Vision

was installed. Click the “Clone” button (1). Click “Apply Changes” (3).

Your MAC address is now cloned to the N1 Vision.

Entering a Specific MAC Address

In certain circumstances you may need a specific WAN MAC address.

You can manually enter one in the “MAC Address” page. Type in a

MAC address in the spaces provided

(2) and click “Apply Changes” (3)

to save the changes. The N1 Vision’s WAN MAC address will now be

changed to the MAC address you specified.

(1)

(3)

(2)

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 113 114

Keine Kommentare

Belkin Vision Wireless Router N1 Bedienungsanleitung Seite 48