Belkin Vision Wireless Router N1 Bedienungsanleitung PDF herunterladen (Seite 50)

4746

Using the Web-Based Advanced User Interface

4746

Changing LAN Settings

All settings for the internal LAN setup of the N1 Vision can be viewed

and changed here.

(1)

(2)

(5)

(6)

(4)

(3)

1. IP Address

The “IP address” is the internal IP address of the N1 Vision. The

default IP address is “192.168.2.1”. To access the advanced setup

interface, type this IP address into the address bar of your browser.

This address can be changed if needed. To change the IP address,

type in the new IP address and click “Apply Changes”. The IP

address you choose should be a non-routable IP. Examples of a

non-routable IP are:

192.168.x.x (where x is anything between 0 and 255)

10.x.x.x (where x is anything between 0 and 255)

2. Subnet Mask

There is no need to change the subnet mask. This is a unique,

advanced feature of your Belkin Router. It is possible to change

the subnet mask if necessary; however, do NOT make changes to

the subnet mask unless you have a specific reason to do so. The

default setting is “255.255.255.0”.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 113 114

Keine Kommentare

Belkin Vision Wireless Router N1 Bedienungsanleitung Seite 50