Belkin Vision Wireless Router N1 Bedienungsanleitung PDF herunterladen (Seite 91)

8786

Manually Configuring Network Settings

section

Manually Configuring Network Adapters in Windows 98SE or Me

Right-click on “My Network Neighborhood” and select

“Properties” from the drop-down menu.

2. Select “TCP/IP Settings” for your installed network adapter. You

will see the following window.

(1)

(2)

(3)

3. If “Specify an IP address” is selected, your N1 Vision will need to

be set up for a static IP connection type. Write the address

information in the table below. You will need to enter this

information into the N1 Vision.

4. Write the IP address and subnet mask from the “IP Address”

tab (3).

5. Click the “Gateway” tab (2). Write the gateway address down in

the chart.

6. Click the “DNS Configuration” tab (1). Write the DNS address(es)

in the chart.

7. If not already selected,

select “Obtain IP

address automatically”

on the IP address tab.

Click “OK”.

Restart the computer. When the computer restarts, your network

adapter(s) are now configured for use with the N1 Vision.

1 2 ... 86 87 88 89 90 91 92 93 94 95 96 ... 113 114

Keine Kommentare

Belkin Vision Wireless Router N1 Bedienungsanleitung Seite 91