Belkin Vision Wireless Router N1 Bedienungsanleitung PDF herunterladen (Seite 89)

8584

Manually Configuring Network Settings

section

4. Select the “TCP/IP” tab (3). Next to “Configure” (4), you should

see “Manually” or “Using DHCP”. If you do not, check the

PPPoE tab (5) to make sure that “Connect using PPPoE” is NOT

selected. If it is, you will need to configure your N1 Vision for a

PPPoE connection type using your user name and password.

5. If “Manually” is selected, your N1 Vision will need to be set up

for a static IP connection type. Write the address information

in the table below. You will need to enter this information into

the N1 Vision.

6. If not already selected, select “Using DHCP” next to “Configure”

(4), then click “Apply Now”.

Your network settings are now configured for use with the

N1 Vision.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 113 114

Keine Kommentare

Belkin Vision Wireless Router N1 Bedienungsanleitung Seite 89