Belkin F5U022 Betriebsanweisung PDF herunterladen (Seite 10)

ColorSorting

B23

ColorSort does not work for the two-color monogram that I created

When creating Two-color lettering, ensure that the Jump Stitch Connection is selected. If

Running Stitch Connection is selected, you will not be able to ColorSort the lettering.

B30 When I ColorSort a Customized embroidery the number of color blocks

produced varies

The ColorSort process does not just put the same color blocks together. It checks for overlap

between areas, therefore depending on the overlaps created during Customizing the final

number of color blocks may vary, even if you are Combining a similar number of Shapes or

monograms.

Combining and Saving Designs

B04

What causes the message "Design is too large, or will not fit in hoop"?

If a design has been Scaled too large or is positioned partly outside the Stitch Area, this

message will appear when you try to combine or save it. Reduce the scaling or move the

design so that all designs are within the hoop boundaries.

B26 My lettering turns black when merged with a design

There is a limit of 99 color changes in any Customized file (60 color blocks can be displayed

in the Color Worksheet). If the number of color changes goes over 99 when you Combine

designs, shapes or monograms, the remainder of the colors will appear black.

This may occur in a two-color monogram, as each letter contains two color changes. When

creating monograms using a two-color font, do not exceed 49 letters.

If you find your design is using too many colors we recommend using the colorsort function

to reduce them automatically.

B48 Why do I get the message "Combining designs. Continue?"

This message appears when you select Combine asking if you wish to continue. You cannot

use the Undo Command to reverse the Combine action, so after Combining you will not be

able to move the designs you have Customized individually. If you are sure you are ready to

Combine, select Yes.

B49 Error: "Design is too large or will not fit in hoop"

This message appears if a Stitch File you are trying to Combine or Save is outside the

selected hoop or larger than will fit in it. For example, with the 100mm x 100mm hoop

selected, a design smaller than 100mm x 100mm might be placed partially outside the Stitch

Area when you click Combine. This message would then appear. Move the design

completely within the four blue corners of the Stitch Area and try again.

B50 Error: "Design too large for export format"

Certain formats are limited to the number of stitches they can save or the size of hoop used

on their specific embroidery machine, for example .sew. If you attempt to save a file in this

FAQ Lists for Pfaff VIP Software Page 10

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 210 211

Keine Kommentare

Belkin F5U022 Betriebsanweisung Seite 10