Belkin F5U022 Betriebsanweisung PDF herunterladen (Seite 74)

• Virtual PC 4.0 running Windows® ME

• Belkin F5U103-MAC USB Serial Adapter with driver version 1.1.1

The Belkin F5U103-MAC USB Serial Adapter was used because a Macintosh computer

does not have a COM type serial port that is needed for communications with a Pfaff creative

card station and/or creative 2140 embroidery machine.

Virtual PC 4.0 was configured as follows:

• Processor: “Enable MMX compatibility” checked

• PC Memory: 460MB

• COM1 Port: “Mac Serial Port” selected; “Belkin USB Serial Adapter” selected from the

list, and “Non-modem device” checked.

• COM2 Port: “None” checked

• USB:“Enable USB” checked, “USB-232 Adapter” unchecked and “USB Token” (dongle)

checked

In Windows ME, the settings for COM1 were set as follows in the Control Panel:

• Bits per second: 9600

• Data Bits: 8

• Parity: None

• Stop Bits: 1

• Flow Control: XON/XOFF

To use the Pfaff creative Software with Pfaff creative embroidery machines, the following

settings were used in VIP Configure:

• ‘Pfaff 2140’ setting: COM1

• ‘Pfaff creative card station’ setting: COM1

The Pfaff creative Suite ran normally as on any other Windows platform. However, the

following was found in regard to hardware and communications:

• The Belkin USB-Serial Adapter is not recognized when the Mac is booted up from cold,

so COM1 is initially not available to Virtual PC. After booting for the first time, unplug and

reconnect the adapter, then reboot the Mac. The adapter will then be recognized

correctly by OS 9 and Virtual PC.

• All communication aspects worked correctly between VIP File Assistant and the Pfaff

creative 2140 embroidery machine.

• It was not possible to update the Pfaff creative 2140 with new firmware (this is a program

that is run directly from Windows Explorer).

• All communication worked correctly between creative Customizing and the creative card

station.

• It was not possible to establish communications with a Pfaff creative 7570 embroidery

machine. Use a creative card station to read from and write to cards for use in the 7570.

• The “USB Token” option is only be available in the USB section of Virtual PC when the

dongle is inserted into the MAC.

• Restarting the Mac with the dongle inserted gives a message that 'The software cannot

be found for USB Token'. This message is generated by OS 9, which does not use the

dongle. Click OK to close the message and carry on as normal.

FAQ Lists for Pfaff VIP Software Page 74

1 2 ... 69 70 71 72 73 74 75 76 77 78 79 ... 210 211

Kommentare zu diesen Handbüchern

Keine Kommentare

Belkin F5U022 Betriebsanweisung Seite 74

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Nein Belkin F5U022